Printing Surface Strength Test Machine（Spring acceleration method）
JH-YSS-AT Printing surface strength test machine is to determine the paper surface fiber, glue, filler or paper surface coating particles between and between the coating and the paper base bond strength; it shows the paper in the printing process of ink splitting resistance.
Paper surface strength test is very important for papermaking enterprise, the enterprise can through the paper surface strength tester, tester suitable seal, according to different paper surface strength tester to combined with detection data in different levels of surface strength requirements, adjust the beating process, slurry ratio, the dosage of filler, glue, crushing and drying curve and so on, make quality meet the requirements of cost at the same time to a minimum.
Paper printing adaptability tester is equivalent to small printing machine, which can be used for paper surface strength, printing smoothness, roughness, ink absorption, ink transfer, printing density (with special accessories) and other printing adaptability test. It can be used for paper mill, printing mill and ink mill to test the adaptability of printing materials.
Standard:
GB/T22365-2008
ISO3783-2006
QB/T 1020-2010
Parameter:
Test range：（20~350）cm/s
Pendulum Angle：165°
The printing plate：φ65mm×10mm, φ65mm×20mm。
Swing speed：（20～125）cm/s
Printing pressure：0～700N
Body size: fan Angle 155 °, the radius of 85 mm, 35 mm width
Width：35mm
Specification of rubber pad: (L*b*h, mm) : 320×35×1.5
Specification of paper pad: (L*b*h, mm) : 305×35×1.5
Dimensions: (L*b*h, mm) : 420×260×355
Working conditions: temperature (20± 10 ° C), humidity < 85%
Power：AC220V，50Hz
