Office Chair Armrest Pressure Tester
JH- FSN Office chair armrestpressure tester is used to test the durability of office chair armrest underthe action of cyclic lateral pressure (force direction and plumb line into10(+/-1) degree Angle direction).Suitable for all chairs with armrests.
Standard: ANSI/BIFMAX5.1-2011-13/19/20/21/23.
Parameter:
Theclamping device with an opening of 120 degrees and a width of 100mm isinstalled on an inclined plane of 10 degrees
Cylinderstroke: 0-80mm
Theheight of the fulcrum at the back of the cylinder is 40-2750px
Counter6 bit LCD display, power off memory, output control 60,000 times
Cycle speed 10-30rpm or specify 10-30rpm orspecify
Single-phaseAC220V, 0.5a
Size:(W*L*H) 140*120*4250px
Principle：
Thechair is fixed on the test surface, the force clamp is adjusted to theappropriate position, and the force of 400N of reciprocating pressure along the10 degree Angle of the plumb line at the speed of 10-30cpm is tested on thearmrest 60,000 times. Result evaluation: the structure shall not be damaged orlose function after test.
